1.4mm Gravity Gun

Gravity fed air spray gun model options with a 1.4 mm needle nozzle standard option

Supernova LS400 Anest Iwata Spray Gun

Anest Iwata LS400 Supernova gravity feed high volume low pressure (HVLP) spray gun range are one of the most ergonomic and futuristic looking spray guns available. Anest Iwata Supernova LS400 are are at the very high end of center mount HVLP gravity feed spray guns. Pinninfarina design house in Italy worked closely with Anest Iwata to produce this very modern looking gravity fed HVLP spray gun.

LS400 Supernova HVLP Anest Iwata Gravity Spray Guns Image

Samson Arnold GFS Gravity Feed Air Spray Gun

Samson Arnold GFS Gravity feed air spray guns are a long established and very well known gravity feed air spray gun range that are popular in timber and joinery finishing and general refinish and industrial industries due to the Samson Arnold rugged construction and value for money.

Samson Arnold GFS gravity air spray guns are available with a 1.4mm nozzle and needle setup for base and top coats, stains, lacquers and poly urethanes or a 2.0mm fluid set up that can be used to apply primers, fillers and general purpose heavy viscosity coatings.

Gravity Feed Air Spray Gun Samson Arnold GFS

S-106 Star Gravity Feed Air Spray Gun

Star Classic S-106 center mount gravity feed air spray gun range are available in a wide range of needle nozzle setup sizes starting at 1.4mm, 1.7mm, 2.0mm, 2.5mm, 2.8mm and 3.5mm options and are supplied complete with a 600 ml pot. All Star S-106 gravity air spray guns opertate optimally at 50 psi compressed air inlet pressure.

Star S-106 gravity air spray gun range performance details are listed below.

Star S-106-1G

Gravity Feed Air Spray Gun Star S-106

LPH101 LV HVLP Anest Iwata Gravity Air Spray Gun

Anest Iwata LPH101 is a side mount gravity feed HVLP, high volume low pressure, air spray gun that is designed to consume lower volumes of compressed air compared to traditional HVLP air spray paint guns. All setup models are designed to operate at 1.3 bar or 18 psi inlet compressed air operating pressure and consume 240 litres per minute or 8 cfm of compressed air volume. There are 4 models available in this range, a 1.2mm, 1.4mm, 1.6mm and a 1.8mm version. 1.2mm and 1.4mm models are fitted with the E2 air cap and the 1.6 and 1.8 models use the E4 air atomising cap.

Gravity Air Spray Gun LPH101 LV HVLP Anest Iwata


Subscribe to RSS - 1.4mm Gravity Gun