W101 High TEC Anest Iwata compact suction feed spray gun range are available in fluid nozzle set up sizes of 1.0 millimetre, 1.3 millimetre 1.5 millimetre and 1.8 millimetre with a combination of three different atomising air cap options for the 1.3 millimetre set up and two different air cap options for the 1.5 millimetre set up to deliver a range of fluid output and spray fan pattern width options. additionally the Anest Iwata W101 suction feed spray gun can be purchased as the spray gun head only or complete with the LA700 700 millilitre paint cup or the Anest Iwata PCL.7B.2 700 millilitre suction feet paint pot.
As with all Anest Iwata High TEC air spray gun models the W101 spray guns have extremely high transfer efficiency that is as good as or even better than many high-volume low-pressure spray guns and with paint atomisation quality is generally superior while consuming considerably less volumes of compressed air than typical conventional air spray guns and high-volume low-pressure spray guns.
W101101S is the 1.0 millimetre set up W101 which requires approximately 75 litres per minute or 2.6 cubic feet per minute compressed air delivery with fluid outputs of up to 85 millilitres per minute and fan pattern wits of up to 120 millimetres wide.
W101131S is a 1.3 millimetre setup W101 suction feed air spray gun which will consume up to 145 litres per minute or 5.1 cubic feet per minute of compressed air volume and is capable of outputting up to 150 millilitres of fluid at fan widths of up to 150 millimetres wide. This model is fitted with the K1 atomising air cap
W101132S is also a 1.3 millimetre suction feed W101 air spray gun set up using the H2 atomising air cap which can consume up to 225 litres per minute or 7.9 cubic feet per minute of compressed air with fluid deliveries of up to 150 millilitres per minute and fan pattern widths of up to 160 millimetres wide.
W101134 is another 1.3 millimetre W101 suction feed air spray gun fitted with a H4 atomising air cap which can require up to 210 litres per minute or 7.4 cubic feet per minute of compressed air and this spray gun can output up to 140 millilitres per minute of fluid at fan pattern with some of up to 180 millimetres wide
W101151S is one of the 1.5 millimetre W101 suction feed air spray guns this model is fitted with a K1 atomising air cap and requires up to 145 litres per minute or 5.1 cubic feet per minute of compressed air and can deliver up to 175 millilitres of material at fan pattern widths of up to 170 millimetres wide
W101152S is an optional 1.5 millimetre W101 suction feed air spray gun fitted with a HS atomising air cap which can require up to 225 litres per minute or 7.9 cubic feet per minute of compressed air and output up to 170 millilitres of material with fan widths adjustable up to 175 millimetres wide.
W101181S is the largest setup 1.8 millimetre suction feed or 101 air spray gun which will consume up to 170 litres per minute or 6 cubic feet per minute and is capable of a fluid outputs of up to 210 millilitres per minute and spray fan pattern widths of up to 170 millimetres wide
- Order any W101 suction feed spray gun head only by selecting part numbers ending with a S only
- Order the W101 with the LA 700 pot by selecting part numbers ending in LA
- Order the W101 with the Anest Iwata PCL.7B.2 pot by selecting part numbers ending in C
