RG3L Anest Iwata Gravity Feed Air Spray Gun

Anest Iwata RG3L gravity spray gun at just 80 grams total weight for the spray gun head only is a very light weight side feed gravity air spray gun that is perfect for fine spray painting work in the film and beauty industries, and also with artists requiring application rates for any areas greater than an airbrush is capable of delivering.

There are three setup options available 0.4mm, 0.6mm and 1.0mm and each of these spray guns have a round fan pattern although there is an optional flat fan pattern atomising air cap available as an accessory for the 0.6mm setup. The Anest Iwata RG3L gravity air spray gun should be operated with 2.5 bar or 36 pounds per square inch inlet air pressure.

RG.3L.1C

  • 0.4mm setup
  • 30 litres per minute or 1.1 cfm compressed air consumption
  • 15 ml per minute fluid output
  • 25 mm wide spray pattern
  • number 1 air cap

RG.3L.2C

  • 0.6mm setup
  • 30 litres per minute or 1.1 cfm compressed air consumption
  • 35 ml per minute fluid output
  • 25 mm wide spray pattern
  • number 2 air cap

RG.3L.3C

  • 1.0mm setup
  • 50 litres per minute or 1.1 cfm compressed air consumption
  • 80 ml per minute fluid output
  • 35 mm wide spray pattern
  • number 3 air cap

These Anest Iwata RG3L side feed gravity air spray guns may be purchased direcly from this page with the genuine Anest Iwata PC150S 150ml stainless steel side feed gravity pot (part numbers ending with C) or the spray gun only may be purchased with the pot, (part numbers ending in numbers only).

Gravity Feed Air Spray Gun Anest Iwata RG3L

Brand: 

Nozzle Sizes: 

Category: