Anest Iwata LPH400 centre feed high volume low pressure gravity feed models are a high quality HVLP model range with a total of ten needle nozzle and air cap setup options to choose from. Anest Iwata LPH400 HVLP are a low volume air consumption HVLP spray gun.
Model LPH400LV is available in 1.2mm, 1.4mm, 1.6mm and 1.8mm fluid tip options. Each option operates at 1.1 bar or 16 psi air pressure and consumes 269 litres per minute or 9.5 cubic feet per minute of compressed air flow and the common air cap number is an LV4.
LPH400124LV
- 1.2mm nozzle
- 90 ml per minute fluid output
- 259 mm wide spray pattern width
LPH400144LV
- 1.4mm fluid nozzle
- 130 ml per minute fluid output
- 290 mm wide spray pattern width
LPH400164LV
- 1.6mm fluid nozzle
- 150 ml per minute fluid output
- 300 mm wide spray pattern width
LPH400184LV
- 1.8mm fluid nozzle
- 190 ml per minute fluid output
- 320 mm wide spray pattern width
Model LPH400LVX is designed for use with almost all basecoat colours using either solventbourne or waterbourne coatings. This version is available in 1.3mm, 1.4mm and 1.5mm fluid tip setups, all models operate at 1.1 bar or 16 psi air pressure and consume 278 litres per minute or 9.8 cubic feet per minute of compressed air flow and the common air cap number is an LVX.
LPH400134LVX
- 1.3mm fluid nozzle
- 120 ml per minute fluid output
- 300 mm wide spray pattern width
LPH400144LVX
- 1.4mm fluid nozzle
- 130 ml per minute fluid output
- 310 mm wide spray pattern width
LPH400154LVX
- 1.5mm fluid nozzle
- 145 ml per minute fluid output
- 330 mm wide spray pattern width
Model LPH400LVB is designed for spraying metallics and pearls and avoid effects such a mottling, blotching and streaking which often happens with these types of paints when sprayed through regular spray guns. There are three needle nozzle size options with this version, 1.3mm, 1.4mm and 1.5mm. Each version operates at 0.97 bar or 14 psi air pressure and consume 235 litres per minute or 8.3 cubic feet per minute of compressed air flow and the common air cap number is an LVB.
LPH400134LVB
- 1.3mm fluid nozzle
- 95 ml per minute fluid output
- 320 mm wide spray pattern width
LPH400144LVB
- 1.4mm fluid nozzle
- 110 ml per minute fluid output
- 325 mm wide spray pattern width
LPH400154LVB
- 1.5mm fluid nozzle
- 125 ml per minute fluid output
- 335 mm wide spray pattern width
Purchasing options are either the LPH400 spray gun head only or complete with the matching genuine Anest Iwata 600 milliliter PCG-6P.M paint pot. All part numbers ending with the letter C include a pot.
