Anest Iwata have upgraded the original Air Gunsa AZ3HTE gravity air spray gun to this new model the AZ3HTE2 which is lighter than its predecessor by 50 grams and is fitted with a new improved compressed air flow valve and an all new improved AKULON gravity paint pot. All spare parts are interchangeable with the former AZ3HTE model. There is a full range of fluid need nozzle setup options available from 1.3mm, 1.5mm, 1.8mm, 2.0mm, 3.0mm and 3.5mm.
Air Gunsa AZ3HTE213C
- 1.3mm fluid need and nozzle
- 2.0 bar 29psi optimal atomising air pressure
- 200 litres per minute 7 cfm compressed air consumption
- 240mm wide spray fan pattern
Air Gunsa AZ3HTE215C
- 1.5mm fluid need and nozzle
- 2.0 bar 29psi optimal atomising air pressure
- 200 litres per minute 7 cfm compressed air consumption
- 260mm wide spray fan pattern
Air Gunsa AZ3HTE218C
- 1.8mm fluid need and nozzle
- 2.0 bar 29psi optimal atomising air pressure
- 205 litres per minute 7.24 cfm compressed air consumption
- 300mm wide spray fan pattern
Air Gunsa AZ3HTE220C
- 2.0mm fluid need and nozzle
- 2.0 bar 29psi optimal atomising air pressure
- 205 litres per minute 7.24 cfm compressed air consumption
- 340mm wide spray fan pattern
Air Gunsa AZ3HTE225C
- 2.5mm fluid need and nozzle
- 3.0 bar 43psi optimal atomising air pressure
- 279 litres per minute 9.85 cfm compressed air consumption
- 360mm wide spray fan pattern
Air Gunsa AZ3HTE230C
- 3.0mm fluid need and nozzle
- 3.0 bar 43psi optimal atomising air pressure
- 288 litres per minute 10.2 cfm compressed air consumption
- 400mm wide spray fan pattern
Air Gunsa AZ3HTE235C
- 3.5mm fluid need and nozzle
- 3.0 bar 43psi optimal atomising air pressure
- 307 litres per minute 10.8 cfm compressed air consumption
- 420mm wide spray fan pattern
- Top quality spray putty gravity air spray gun
