Air Gunsa AZ1HTE 2S from Anest Iwata suction feed air spray gun features high transfer efficiency resulting in lower levels of paint over spray meaning less paint wastage while delivering a fine paint atomisation spray pattern.
The Air Gunsa AZ1HTE 2S has replaced the Air Gunsa AZ10HTE and features a new design atomising air cap that delivers a long and flat tulip shaped spray fan pattern even when spraying heavy materials and improved transfer efficiency over the AZ10HTE.
An Air Gunsa AZ1HTE 2S suction feed air spray gun head only without pot weighs only 488 grams and this quality spray gun is ideal for medium to large jobs at an economic price point. Air consumption has been further reduced compared to the already efficient performance of the AZ10HTE making this an ideal air spray gun for those with limited air compressor size.
The Air Gunsa AZ1HTE 2S suction feed air spray gun head is ideal for waterborne coatings and features an easy clean polished flat and smooth spray gun body and built in compressed air flow inlet control.
Available setup fluid nozzle sizes are 1.0mm, 1.3mm, 1.5mm, 1.8mm, 2.0mm, 2.5mm, 3.0mm and 3.5mm and as this spray gun can also be used as a pressure feed spray gun we have the option to purchase complete with a premium Anest Iwata PCL.10B.3 1000ml lever action suction pot or just the spray gun head only without pot for use attached to a paint pressure pot or double diaphragm paint pump.
Suggested operating inlet air pressure for all models is 2.5 Bar or 36 pounds per square inch at the spray gun air inlet.
Model Number AZ10HTE20
- 2.0 mm setup
- 184 litres per minute (6.5 cfm) air consumption
- Up to 169 ml/minute fluid flow
- Up to 230mm wide spray fan pattern width
- Atomising air cap HTE-P0