W200 High TEC suction feed spray gun model range from Anest Iwata offers an extensive range of fluid needle fluid nozzle and atomising air cap set up combination options. Additionally the Anest Iwata W 200 suction feed spray gun may be purchased as spray gun head only or complete with either the 1 litre LA1000 suction feed paint cup or the premium Anest Iwata PCL.10B.3 1000 mL suction feed paint cup.
Available fluid nozzle setups in the Anest Iwata W 200 suction feed spray gun range are 1.5mm, 1.8mm, 2.0 mm and 2.5 mm. The entire range of W200 standard models is further varied to suit a wide range of spray painting applications through the availability of five different atomising air caps to suit the W200.
Anest Iwata W200 High TEC delivers a huge benefit of high transfer efficiency which rivals or even exceeds HVLP while at the same time avoiding high air consumption that is common with high volume low pressure spray guns.
Anest Iwata W200 Suction Feed Spray Gun Models
- W200151S is a 1.5 mm set up W200 suction spray gun fitted with the K1 atomising air cap this model operate best at 2 bar or 28 PSI air inlet pressure and consumes approximately 200 litres per minute or 7.1 cubic feet per minute of compressed air. The W200151S can deliver up to 240 mL per minute of fluid and up to a 210 mm wide spray fan pattern
- W200152S is another 1.5 mm set up W 200 suction spray gun and this model is fitted with the K2 atomising air cap and operate best at three bar or 44 PSI inlet air pressure and will consume up to 330 litres per minute or 11.7 cubic feet per minute of compressed air. The W 200152S can deliver up to 240 mL per minute of fluid and up to a 290 mm wide spray fan pattern
- W200182S is a 1.8mm set up W 200 suction spray gun fitted with the K2 atomising air cap and this model is also designed to operate best at three bar or 44 PSI compressed air inlet pressure and consumes 330 litres per minute or 11.7 cubic feet per minute of compressed air. the W200182S is capable of delivering up to 290 mL of fluid per minute and a spray pattern fan width of up to 340 mm wide
- W200201S is a 2.0 mm fluid nozzle set up W200 suction feed spray gun and this model is fitted with the R1 atomising air cap, operates best at three bar or 44 PSI inlet air pressure and requires up to 290 litres per minute or 9.2 cubic feet per minute of compressed air. The W200201S can deliver up to 350 mil per minute of fluid and spray pattern fan widths of up to 350 mm
- W200202S is another 2.0 mm fluid nozzle set up W200 suction feed spray gun and this model is fitted with the R2 atomising air cap, recommended inlet air operating pressure is 3 bar or 44 PSI and expected maximum air consumption will be 360 litres per minute or 12.7 cubic feet per minute. The W200202S can deliver up to 350 mil per minute of fluid and achieve a maximum spray paint fan pattern width of 350 mm
- W200251S is a 2.5 mm fluid nozzle set up and three bar or 44 PSI air operating pressure is recommended. compressed air consumption will be up to 360 litres per minute or 12.7 cubic feet per minute. The W200251S uses the W1 atomising air cap and is able to deliver up to 440 mL per minute fluid with a maximum spray fan pattern of up to 280 mm wide.
To order the Anest Iwata W 200 spray gun head only without paint cup in the letter S only. Order the Anest Iwata W 200 spray gun complete with the 1 litre LA1000 paint cup by selecting any part number with the letters LA after the S. and to order the Anest Iwata W 200 complete with the Iwata PCL.10B.3 1 litre suction feet pot any part number ending in the letter C.
